Stimson’s Python Care Guide

Stimson's python care guide

Stimson’s pythons are calm, ground-dwelling pythons from central and western Australia that grow to 28 to 42 inches and can live up to 30 years, a great match for beginners. Set up an escape-proof enclosure of 36 × 18 × 18 inches or more with a 90°F basking spot and warm hide, a 78 to 84°F cool zone, low-level UVB and humidity between 20 and 80%. Juveniles eat every 7 to 10 days and adults every 2 to 3 weeks, with frozen-thawed prey weighing about 10% of the snake.

Stimson's python quick facts

Scientific nameAntaresia stimsoni
Experience levelBeginner
Adult size28–42 in (71–107 cm), most around 3 ft (90 cm)
LifespanUp to 30 years
ActivityNocturnal, mostly on the ground
Adult enclosure36 × 18 × 18 in (90 × 45 × 45 cm) minimum
Basking spotAbout 90°F (32°C) surface
Warm hide90°F (32°C)
Cool side78–84°F (26–29°C)
NightHeat off; can drop to 68°F (20°C)
Humidity20–80%, plus a humid hide
UVBLow-output lamp, UVI 2–3 at the basking spot
DietRodents, birds and lizards, frozen-thawed
FeedingEvery 7–10 days (juveniles), 2–3 weeks (adults)
HousingAlone

Is a Stimson's python the right snake for you?

If you want a small, easygoing python, a Stimson’s python is hard to beat. They are hardy, slow-moving and generally docile, take handling calmly and bite very rarely, which makes them excellent for beginners. Adults measure 28 to 42 inches (71 to 107 cm), most around 3 feet (90 cm), and they can live up to 30 years.

Their wild range spans much of Australia, from the middle of the continent across to its western shores and some islands offshore. They live in rocky gorges, sand plains, scrub, shrubland, riverside woodland, dry forest and grassland, but rarely stray far from rock outcrops and caves, ideally near water. They stay mostly on the ground and are active at night.

Look for large, rounded, smooth-edged brown blotches along the spine, a row of smaller ones on each side, and a pale stripe between the rows, all on a light background. Color and contrast vary a lot from snake to snake. Males and females look alike and grow to the same size, and both have small spurs beside the vent.

Stimson's python enclosure size

An adult Stimson’s python needs an enclosure of at least 36 × 18 × 18 inches (90 × 45 × 45 cm). For a ground-dwelling snake, the length should at least match the body so it can stretch out, the depth should let it turn among the décor, and the height should leave room to hang the lamps safely.

Larger is better when the space is well set up. Whatever you choose, make it escape-proof: babies are tiny, squeeze through small gaps and are very hard to find once loose. Front-opening enclosures with tight seams and swinging doors are the most secure.

Keep Stimson’s pythons one to an enclosure. They are not especially social and do not need company.

Temperatures and heating

Stimson’s pythons need a basking surface near 90°F (32°C), a warm hide held at that same 90°F, and a cooler end of 78 to 84°F (26 to 29°C). Overnight, switch the heat off and let the enclosure drop, as low as 68°F (20°C).

The basking lamp. Even night hunters should be able to bask under an incandescent bulb, whose warmth resembles sunshine. A pair of 50 to 75-watt incandescent spot bulbs usually heats enough area for an adult’s coils. Beneath them, lay a flat, light-colored stone on a black plastic hide box, and adjust the wattage if the stone runs hot or cool.

The warm hide. In the wild these snakes rest in burrows and rock crevices that hold the day’s warmth. Mimic this by sliding a heat mat between the stone and the hide box, wired to an on/off thermostat at 90°F (32°C) with the probe inside the hide. Check it often with a temperature gun.

Night and measuring. If the room dips under 68°F, add a radiant heat panel or small heat projector on a dimming thermostat. Use a temperature gun for spot checks and digital probe thermometers for ongoing readings.

Brumation. A natural winter slowdown supports a healthy hormone cycle. Dim the basking lamps gradually in late fall and bring them back up just as slowly in early spring. Never brumate a sick or underweight snake, and see a vet if it drops much weight during the cool period.

Lighting and UVB

Provide 12 hours of light a day, or set a smart timer to match your local sunrise and sunset.

A Stimson’s python can survive without UVB but will not thrive. UVB keeps its daily and hormonal rhythm on track and provides all the vitamin D3 it needs. Use a low-output UVB lamp long enough to cover the snake’s body as it basks, mounted over the warm side so it overlaps the heat lamps, in a reflective fixture. Aim for a UV index of 2 to 3 at the basking surface:

  • Compact 7% low-output kit: 6 to 8 inches (15 to 20 cm) above mesh, or 9 to 10 inches (23 to 25 cm) with no mesh.
  • 5 to 6% T5 HO tube: 10 to 13 inches (25 to 33 cm) above mesh, or 14 to 17 inches (36 to 43 cm) with no mesh.

Distances run to the snake’s back and assume mesh blocking about 35% of UVB; confirm with a UV index meter. Change the lamp every 12 months, as UVB fades before the light does.

Humidity and water

Stimson’s pythons cope with humidity anywhere from 20 to 80%, as long as they also have a humid hide. Wild ones go quiet when humidity falls below 20% and become far more active after rain, though that is probably because rain brings out their prey.

  • Humid hide: a hide box on the cooler half, lined with lightly moistened sphagnum moss or substrate.
  • Measuring: a digital hygrometer with its probe resting on the substrate at mid-enclosure. Higher readings at the cool end and at night are normal.
  • Upper limit: do not let humidity sit above 80% for long, as it may make the snake sick.
  • Misting: a light spray now and then, ideally first thing in the morning, like dew.
  • Water: a small bowl of clean water every day, scrubbed weekly with veterinary disinfectant.

Best substrate for Stimson's pythons

Choose a loose substrate, 2 to 3 inches (5 to 8 cm) deep, because Stimson’s pythons like to hide beneath it. A 36 × 18 inch enclosure needs roughly 23 to 34 quarts (0.75 to 1.1 cubic feet).

  • Works well: aspen bedding, fine coconut husk chips, play sand, or a home-made semi-arid blend of 40% topsoil, 40% play sand and 20% burrowing clay by weight.
  • Quarantine only: paper towels or terrarium mats.

Hides, rocks and décor

Recreate the rocky places Stimson’s pythons favor, with caves, stone and fallen timber. They mostly stay low but will climb now and then.

  • At least two hides tight enough for a snug fit, plus the humid hide
  • Flagstone, cork logs and flats, cholla and ghostwood, and ledges
  • Artificial plants, or tough drought-tolerant plants such as haworthia, echeveria, snake plant and aloe

Anchor any rock stack to the enclosure floor and glue the stones so nothing can slip and crush the snake. Keep the inside of the stack reachable so you can retrieve the snake quickly.

What do Stimson's pythons eat?

Stimson’s pythons eat whole prey: every 7 to 10 days for juveniles and every 2 to 3 weeks for adults, with a longer gap after a larger meal. Offer prey totaling roughly 10% of the snake’s weight, or 1 to 1.5 times as wide as its thickest point.

Check body condition against photos of healthy wild Stimson’s pythons. If your snake is getting heavy, use smaller prey; if it is thin, feed more often.

A varied menu. In the wild they eat small birds, bats, rodents, frogs and lizards, and hatchlings are especially keen on lizards and frogs. Build the diet around mice and add young rats, hamsters, gerbils and quail, chicks, and feeder lizards such as green anoles and small geckos.

Thawing and offering. Frozen-thawed prey is safer and kinder than live. Warm it in a sealed bag set in warm water until it reaches 90 to 100°F (32 to 38°C). These snakes are very eager feeders, so use soft-tipped tongs to keep your fingers clear.

Supplements. On every fourth to sixth meal, lightly dust the prey with a half-and-half mix of calcium and multivitamin powder before thawing.

Handling your Stimson's python

Most Stimson’s pythons accept handling calmly and bites are very rare, though babies can be defensive at first, either striking or burying their heads in their coils.

  1. Allow about 2 weeks for a new snake to settle, and wait until it is eating regularly.
  2. Keep first sessions to 5 minutes or less, and return the snake only when it is calm, which teaches it that calm is rewarded.
  3. Lengthen sessions gradually. Handling at least weekly keeps the snake tame; more than once a day is too much.
  4. Let the snake climb onto your hand instead of grabbing it, lift from underneath, and keep most of its body supported.
  5. Keep your movements slow and stay mostly in one place.

Health, quarantine and hygiene

Quarantine. A new snake should live apart from any other reptiles in a simple setup for as long as 6 weeks. Use that time for a checkup with an experienced reptile vet, any parasite or disease tests, and close observation.

Routine cleaning. Pick out waste and soiled substrate as soon as you see it, and change all the substrate every 3 to 6 months. Every 6 to 12 months, empty the enclosure, scrub décor in hot water, and disinfect the walls and floor with a veterinary disinfectant or a 10% bleach solution, respecting the label’s contact time and rinse instructions. Returning a handful of the old, clean substrate helps the snake settle, since it relies heavily on scent.

Your hygiene. Clean your hands or wear fresh gloves before handling, never eat while handling, and scrub up with soap afterward. After touching a snake of unknown health, change clothes before going near your own animals.

Call a vet about ongoing weight loss, wheezing or mucus, or any snake that seems unwell.

Stimson's python setup checklist

  • Front-opening, escape-proof enclosure of 36 × 18 × 18 in or larger
  • Pair of 50 to 75-watt incandescent spot bulbs in small domes, on a dimmer
  • Light-colored flat stone and black plastic hide for the warm hide
  • Heat mat sized to the hide, with an on/off thermostat
  • Low-output UVB lamp, reflective fixture and timer
  • Temperature gun plus a digital thermometer and hygrometer
  • 23 to 34 quarts of loose substrate
  • Two snug hides and a humid hide
  • Cork, stone and drought-tolerant or artificial plants
  • Small water bowl and veterinary disinfectant
  • Soft-tipped tongs and calcium and multivitamin powder

Getting set up? Find what you need in our shop: Live snakes, Enclosures, Heating & Lighting, Substrate & Bedding, Décor & Hides, Food & Feeders, Supplements. Questions about your setup? Ask us, in the shop in Asheville or online.

Stimson's python FAQ

How big do Stimson's pythons get?

Adults are 28 to 42 inches (71 to 107 cm) long, usually around 3 feet (90 cm). Males and females grow to about the same size.

How long do Stimson's pythons live?

With good care, Stimson's pythons can live up to 30 years.

Are Stimson's pythons good for beginners?

Yes. They are small, hardy and docile, so they make an excellent first snake.

Do Stimson's pythons bite?

Rarely. Adults usually accept handling calmly. Babies can be defensive at first and may strike, but short, regular handling sessions help them settle.

What size enclosure does a Stimson's python need?

At least 36 × 18 × 18 inches (90 × 45 × 45 cm), escape-proof, and larger is better if it is well furnished.

How often do you feed a Stimson's python?

Feed juveniles every 7 to 10 days and adults every 2 to 3 weeks, with prey totaling about 10% of the snake's weight.

Sources: ReptiFiles, Stimson's Python Care Sheet. This guide is general care information, not veterinary advice. If your animal seems unwell, see a reptile veterinarian.

Shop
Search
Account
5 Wishlist
0 Cart
Shopping Cart

Your cart is empty

You may check out all the available products and buy some in the shop

Return to shop