Bredl’s Python Care Guide

Bredl's python care guide

Bredl’s pythons are sturdy, climbing pythons from the dry center of Australia that average 6.5 to 7 feet and can live 20 to 30 years or more. An adult needs an enclosure of at least 7 × 3 × 3 feet, a hot basking surface of 98 to 104°F, a cool end of 82 to 84°F, fairly low humidity with a humid hide, a sandy substrate and low-level UVB. Feed frozen-thawed prey of about 10% of the snake’s weight every 10 to 14 days for juveniles and every 3 to 4 weeks for adults.

Bredl's python quick facts

Scientific nameMorelia bredli
Also calledBredl's carpet python, Centralian carpet python
Experience levelIntermediate
Adult size6.5–7 ft (2–2.1 m); can exceed 8 ft (2.4 m)
Lifespan20–30+ years
ActivityActive by day and by night
Adult enclosure7 × 3 × 3 ft (2.1 × 0.9 × 0.9 m) minimum
Basking spot98–104°F (37–40°C) surface
Cool side82–84°F (28–29°C)
Night73–77°F (23–25°C)
HumidityBelow 50% on average, plus a humid hide
UVB5–6% T5 HO tube, UVI 2–3 at the basking branch
DietWhole rodents, rabbits and birds, frozen-thawed
FeedingEvery 10–14 days (juveniles), 3–4 weeks (adults)
HousingAlone

Is a Bredl's python the right snake for you?

Bredl’s pythons suit keepers who can give a large snake a large, warm, dry enclosure. Adults average 6.5 to 7 feet (2 to 2.1 m), and some pass 8 feet (2.4 m). With good care they can live 20 to 30 years or more. They are also known as Bredl’s carpet pythons or Centralian carpet pythons.

They are brown to reddish snakes patterned with cream bands, spots and blotches edged in a darker shade. The lips are pale with dark bars, and the belly is creamy or yellowish with darker marks.

In the wild they live around Alice Springs, in the south of Australia’s Northern Territory, in dry forest, rocky gorges and shrubland. They move on the ground as well as through the trees, and can be active by day as well as by night. Young snakes are usually nervous and nippy at first.

Bredl's python enclosure size

An adult Bredl’s python needs an enclosure of at least 7 × 3 × 3 feet (2.1 × 0.9 × 0.9 m), length by width by height. That lets the snake stretch out fully and leaves room to climb. Larger is better, and extra height is especially useful: an 8 × 4 × 4 foot enclosure is a good step up.

A big, well-furnished space lets the snake behave naturally: basking, cooling off, climbing, hunting, hiding, and seeking out light or moisture when it needs them. Ready-made enclosures this size are costly, so building your own can save money.

Young snakes can live in the adult enclosure once established, as long as there are plenty of hiding places. House Bredl’s pythons singly. They are not social, and keeping two together causes stress and competition.

Temperatures and heating

Bredl’s pythons come from arid central Australia and need a warm setup: a basking surface of 98 to 104°F (37 to 40°C), a cool end of 82 to 84°F (28 to 29°C) and nights of 73 to 77°F (23 to 25°C). Lowering temperatures by about 5 to 10°F (3 to 6°C) in winter supports a natural seasonal cycle.

Heat source. Halogen flood bulbs give the most sun-like warmth, and a cluster of quality 50-watt halogens above the basking branch usually reaches the target. Begin with a pair of bulbs and add more as the snake grows, so the heated area always covers its whole coiled body.

Inside the enclosure. Lamps mounted inside should be incandescent spot bulbs, each fitted with a bulb cage to prevent burns.

Too hot or too cool. If the basking area overheats, drop to smaller bulbs or replace the halogens with incandescent spots, which give softer heat. If it stays cool, increase the wattage.

Checking. Use an infrared temperature gun on the basking surface and a digital probe thermometer in the warm hide.

Lighting and UVB

Run the lights for about 13 hours a day in summer and 11 hours in winter to support healthy hormone cycles.

Because Bredl’s pythons are active in daylight as well as at night, they benefit from bright light and UVB. They can survive without UVB, but we strongly recommend it for vitamin D3, immune health and activity.

  • UVB: a 5 to 6% T5 HO tube spanning about half the enclosure, over the warm side, in a reflective fixture.
  • Distance: 9 to 11 inches (23 to 28 cm) between the lamp and the snake’s back with the lamp over mesh, or 12 to 15 inches (30 to 38 cm) with it mounted inside. The goal is a UV index of 2 to 3 at the basking spot, best checked with a UV index meter.
  • Bright light: add a 6500K LED or T5 HO grow light across most of the enclosure, since heat and UVB lamps alone cannot light a space this size. It also feeds live plants.

Humidity and water

Bredl’s pythons come from dry country and do well with average humidity below 50%. They still need a humid hide filled with damp sphagnum moss or substrate that they can use whenever they want.

  • Track humidity with a digital hygrometer probe in the middle of the enclosure.
  • Mist now and then with a garden pressure sprayer to mimic a rain shower. A misting just before a shed is especially helpful.
  • Make sure the enclosure is ventilated well enough to dry out afterward.
  • Provide a large bowl of clean water at all times, and scrub it with a veterinary disinfectant weekly.

Best substrate for Bredl's pythons

A sandy substrate 4 inches (10 cm) deep suits Bredl’s pythons best, because the soil in their home range is very sandy. An 8 × 4 foot enclosure needs about 5 cubic feet (150 quarts).

  • Good choices: a home-made arid mix of 60% plain topsoil and 40% play sand, a reptile or desert sand, or a bioactive kit made for desert setups.

Scoop out droppings, urates and soiled sand right away, and replace all of the substrate every 3 to 4 months, depending on how thorough your spot cleaning is.

Climbing, hides and décor

Décor keeps a Bredl’s python active and curious, so it is part of the setup, not an extra. At a minimum, provide a sturdy climbing branch at least 4 feet (1.2 m) long, some cover, and two hides small enough to give a tight fit.

  • Cork logs, rounds and flats, extra hides and wall ledges
  • Tough, drought-tolerant live plants such as carex grass, agave, aloe, haworthia, aeonium and snake plant
  • Sturdy artificial plants

Secure branches to the walls or floor so they cannot fall, which matters more as the snake grows heavier.

What do Bredl's pythons eat?

Bredl’s pythons eat whole animals. Feed juveniles every 10 to 14 days and adults every 3 to 4 weeks.

How much. Each meal should total about 10% of the snake’s weight, provided the snake is not overweight. No single prey item should be more than 1.5 times the width of the snake’s thickest point.

What to offer. Rats and mice are the staples, but variety makes for a healthier snake. Other good options are African soft-furred rats, guinea pigs, hamsters, gerbils, young rabbits, chicks and quail.

Thawing. Frozen-thawed prey is safer for the snake than live and more humane. Set it in a sealed bag in a bowl of warm water until it reaches about 100°F (38°C), and offer it with soft-tipped tongs to avoid an accidental bite.

Supplements. Optional. Every so often, dust the prey lightly with an equal mix of calcium and multivitamin powder before thawing.

Handling your Bredl's python

Expect a Bredl’s python under 2 years old to be jumpy and nippy. Patient handling pays off: a snake used to people is much easier to clean around and take to the vet, and time out of the enclosure is good exercise.

  1. Give the snake time to settle, then begin with sessions of 5 minutes or less, every few days.
  2. Two weeks or so later, slowly increase the length and frequency, aiming for 10 to 15 minutes a day once the snake is comfortable.
  3. Wash your hands first so you smell of soap rather than food, and change clothes if you have been handling other animals.
  4. Give the snake a light tap on the head with a hook or a paper towel tube to signal handling time. Wait for calm, slow tongue flicks before lifting.
  5. Use two hands, one behind the head and the other supporting the body. Never pick it up by the tail.

The snake will wrap around you for balance. Guide it with your hands, keep it away from your neck, and never leave children to handle it alone. Wash up afterward.

Health and common problems

Keep a simple log of your Bredl’s python’s weight, meals and sheds. Most problems come from the setup, so check temperatures and humidity first when something seems off.

  • Shedding problems: if a shed comes off in pieces, mist before the next one and check that the humid hide is damp.
  • Too damp: constant high humidity does not suit a dry-country snake. Improve ventilation and mist less.
  • Burns: always cage bulbs that are inside the enclosure.
  • Obesity: size meals to about 10% of body weight and lengthen the gap between feeds if the snake gets heavy.

Breathing noises, mucus at the mouth or nose, or steady weight loss need a reptile vet. Find one before you need one.

Bredl's python setup checklist

  • Enclosure at least 7 × 3 × 3 ft, larger and taller if possible
  • Dome fixtures with several 50-watt halogen flood bulbs, or caged incandescent spots inside
  • 5 to 6% T5 HO UVB tube with a reflective fixture
  • 6500K LED grow light and a timer
  • Infrared temperature gun and a digital thermometer and hygrometer
  • Garden pressure sprayer
  • Sandy substrate for a 4-inch layer
  • Climbing branch at least 4 ft long, cork pieces and ledges
  • Two snug hides plus a humid hide
  • Drought-tolerant or artificial plants
  • Large water bowl and veterinary disinfectant
  • Feeding tongs and calcium and multivitamin powder

Getting set up? Find what you need in our shop: Live snakes, Enclosures, Heating & Lighting, Substrate & Bedding, Décor & Hides, Food & Feeders, Supplements. Questions about your setup? Ask us, in the shop in Asheville or online.

Bredl's python FAQ

How big do Bredl's pythons get?

Adults average 6.5 to 7 feet (2 to 2.1 m), and some grow beyond 8 feet (2.4 m).

How long do Bredl's pythons live?

With good care, Bredl's pythons can live 20 to 30 years or more.

What size enclosure does a Bredl's python need?

At least 7 × 3 × 3 feet (2.1 × 0.9 × 0.9 m). Bigger, and especially taller, is better.

What temperature should a Bredl's python enclosure be?

Aim for a basking surface of 98 to 104°F (37 to 40°C), a cool end of 82 to 84°F (28 to 29°C) and nights of 73 to 77°F (23 to 25°C).

Do Bredl's pythons need high humidity?

No. They come from dry central Australia and do well below 50% on average, as long as they have a humid hide and an occasional misting, especially before a shed.

How often should I feed a Bredl's python?

Feed juveniles every 10 to 14 days and adults every 3 to 4 weeks, with prey totaling about 10% of the snake's weight.

Sources: ReptiFiles, Bredl's Python Care Sheet. This guide is general care information, not veterinary advice. If your animal seems unwell, see a reptile veterinarian.

Shop
Search
Account
4 Wishlist
0 Cart
Shopping Cart

Your cart is empty

You may check out all the available products and buy some in the shop

Return to shop